Wednesday, October 2, 2013

Halloween Configuration Book Part 6

Hi friends! So happy to hear you're all getting inspired. 
Thank you so much for the comments! 
Sounds like you're making good progress. 

This is a quick section! the two children walking down the path to go trick or treating. How FUN!

This is what you'll need. The die cut children from the last post, a couple trees, mini mister bottle, black soot reinker and some moss. 

Trim the base off the smaller tree. If you don't have 2 small trees you can always trim the larger tree to be a smaller tree.

Trim the backs of the trees so they will fit in the configuration book. 

Mix one dropper full of black soot reinker and fill the mini mister up with water and shake.

Spritz the trees until covered with ink.

Dry with a heat tool.

Sand the children and the cat with a sanding grip. Ink the edges with gathered twig on an ink blending tool. 

Adhere the trees to the inside of the little box.

Using foam tape adhere the children. I used a double layer of foam tape. 

Add the moss. adhere the cat to the moss.

Add a little piece of moss in front of the cat. 
One more section done! 

Thanks for stopping in!
Richele